- HOME
- SEP Rubber (Silicone-modified EPDM)
- SEP-363-U
Product Information
| Appearance | Black |
|---|---|
| Curing agent name | C-11A |
| Standard adding quantity phr | 1.5 |
| Curing conditions (Primary cure) | 170℃×10m |
| Curing conditions (Post cure) | 150℃×2h |
| Hardness Durometer A | 70 |
| Density at 23℃ (g/cm3) | 1.40 |
| Tensile strength (MPa) | 4.8 |
| Elongation at break (%) | 400 |
| Tear strength Crescent piece (kN/m) | 25 |
| Compression set 150℃ × 22 h (%) | 28 |
(Not specified values)
Product Inquiry
SEP-363-U
Inquiry FormRelated Material
Silicone Rubber for Molding（3.0MB）
Characteristic properties of Silicone Rubber Compounds（1.0MB）
Related Product List
| Product name | Grade and features | Appearance | Curing agent name | Standard adding quantity phr | Curing conditions (Primary cure) |
Curing conditions (Post cure) |
Hardness Durometer A | Density at 23℃ (g/cm3) |
Tensile strength (MPa) | Elongation at break (%) | Tear strength Crescent piece (kN/m) |
Compression set 150℃ × 22 h(%) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SEP-1411-U | General use | Pale yellow | C-11A/SEP-BM | 2.0/0.1 | 170℃ × 10 m | 150℃ × 2 h | 47 | 0.99 | 7.8 | 820 | 12 | 40 |
| SEP-1711-U | General use | Yellow | C-11A | 2.0 | 170℃ × 10 m | 150℃ × 2 h | 70 | 1.11 | 17.0 | 600 | 35 | 40 |
| SEP-1421-U | Heat resistance | Pale yellow | C-11A | 2.0 | 170℃ × 10 m | 150℃ × 2 h | 41 | 1.01 | 6.2 | 930 | 12 | 50 |
| SEP-1721-U | Heat resistance | Pale yellow | C-11A | 2.0 | 170℃ × 10 m | 150℃ × 2 h | 72 | 1.15 | 11.0 | 550 | 30 | 45 |
| SEP-1731-U | Extrusion | Gray | C-12/SEP-BM | 4.0/0.2 | 170℃ × 10 m | 150℃ × 2 h | 70 | 1.21 | 14.0 | 600 | 30 | 28 |
| SEP-363-U | Flame retardance | Black | C-11A | 1.5 | 170℃ × 10 m | 150℃ × 2 h | 70 | 1.40 | 4.8 | 400 | 25 | 28 |