- HOME
- Search by required performance
- Scratch Resistance
Scratch Resistance

Improved hardness and surface slipperiness prevent surface abrasions.
Results 23
X-40-9309A

X-40-9309A
- This product contains UV absorber to prevent UV degradation of base material.
- This product cures at room temperature.
- One-component type (contains curing catalyst)
- This product forms high hardness coating film.
X-88-1004

X-88-1004
- Good adhesion to hard-to-bond base materials such as SUS and acrylic
- High hardness and good scratch resistance
X-40-9312

X-40-9312
- High hardness and crack resistance
- Excellent resistance to yellowing and cracking after
KP-310

KP-310
- Dimethyl silicone type with large molecular weight
- Mainly used to impart antifoaming and slip properties
- This product can form hammer tone on coating surface.
KP-360A

KP-360A
- Polyether modified type
- Mainly used as anti-blocking agents
X-40-2450

X-40-2450
- Easy surface migration when added to resins
- Provides antistatic performance with a small amount of addition
- This product can impart peeling, slipping and water sliding properties.
KP-126

KP-126
- Polyether modified product
- Mainly used to add slip properties and mold release properties
- Applicable to water base systems
X-48-5031

X-48-5031
- UV curable, good curability under air
- Contains UV absorbers for superior weather resistance
- Low viscosity, excellent scratch resistance and low warpage
- Compatible with coating methods that require low viscosity, such as spray coating
X-48-5030

X-48-5030
- UV curable, good curability under air
- Low viscosity, excellent scratch resistance and low warpage
- Compatible with coating methods that require low viscosity, such as spray coating
KP-621

KP-621
- Polyester modified product
KP-415

KP-415
- Methacrylic groups at both ends of the siloxane structure
- Mainly used for defoaming and blocking prevention
KP-369

KP-369
- This product is used in solvent systems.
- For adding mold release properties
KP-368

KP-368
- This product is used in solvent systems.
- For adding mold release properties
KP-306

KP-306
- Polyether modified product
- Mainly used to improve leveling and slip properties
KP-301

KP-301
- Polyether modified product
- Mainly used to improve leveling and slip properties
KP-105

KP-105
- Polyol modified product
- Mainly used for improving leveling and slipping properties
- Excellent suitability for polyester and cellulose resin systems in particular
X-40-2327

X-40-2327
- Fast curing
KR-400

KR-400
- Standard product of one-component type (containing curing catalyst)
- High hardness
KR-400N

KR-400N
- High hardness
- KR-400N is made from KR-400 without curing catalysis.
KR-500

KR-500
- Higher molecular weight than KR-515
- Made up of T units only
- Standard product in methyl type
- This product has been used as binder for coating agents and modifier for organic resins.
KR-515

KR-515
- Higher molecular weight than KC-89S
- Contains only T units
- This product has been used as binder for coating agents and modifier for organic resins.
KP-109

KP-109
- Polyether modified product
- Mainly used to improve leveling and slip properties
- Applicable to water base systems
KC-89S

KC-89S
- This product contains only T units.
- This product forms high hardness cured film.
- This product has been used as binder for coating agents.