- HOME
- Search by required performance
- Electrical Insulation
Electrical Insulation

It maintains a high level of volume resistivity over a wide temperature range from room temperature to about 200°C, and shows excellent electrical insulation with little temperature dependence.
Results 21
X-41-1610

X-41-1610
- This product is TX(toluene, xylene)-free type and uses PGMAC solvent.
- This product has the heat resistance of silicone resin and corrosion resistance and adhesion of epoxy resin.
- This product has been used as binder for coating agents.
X-48-1030

X-48-1030
- TX (toluene, xylene)-free type; uses PGMAC solvent
- Excellent heat resistance
- High hardness
- Proven mainly as a binder for heat-resistant paints
X-40-2756

X-40-2756
- Addition cure type
- One-component product containing curing catalyst
- Low curing shrinkage enables molded products and thick films
- Good adhesion to glass substrates
KR-251

KR-251
- Ultra high molecular weight
- Even at room temperature, when the solvent volatilizes, a lacquer film is formed.
- Heating further forms a film with excellent heat resistance and chemical resistance
- This product has been mainly used as coatings with electrical insulation and water resistance.
KR-5235

KR-5235
- This product has the heat resistance of silicone resin and the chemical resistance, bending resistance, and high gloss of polyester resin.
- Owing to the non-stich property, this product has been used as heat resistant paints for kitchen area.
KR-220L

KR-220L
- Solid (100% silicone content) in flake form
- This product has been used as resistor paints, binders for sintered metal powder, etc.
- Less smoke generation
KR-5234

KR-5234
- This product has the heat resistance of silicone resin and the chemical resistance, flex resistance, and high gloss of polyester resin.
- Faster curing speed compared to KR-5230
KR-5230

KR-5230
- This product has the heat resistance of silicone resin and the chemical resistance, flex resistance, and high gloss of polyester resin.
- This is a standard product of polyester resin modified series.
KR-5206

KR-5206
- This product has the heat resistance of silicone resin and the room temperature curability of alkyd resin.
ES-1023

ES-1023
- This product has the heat resistance of silicone resin and corrosion resistance and adhesion of epoxy resin.
- This product has better substrate adhesion and impact resistance tan ES-1001N.
- This product has been used as binder for coating agents.
ES-1002T

ES-1002T
- This product has the heat resistance of silicone resin and corrosion resistance and adhesion of epoxy resin.
- This product can be cured at room temperature in combination with polyamine curing agent (KP-390, etc.).
- Since this product cures at room temperature, it has been used as binder for on-site painting coating agents.
ES-1001N

ES-1001N
- This product has the heat resistance of silicone resin and corrosion resistance and adhesion of epoxy resin.
- This is a standard product of epoxy resin modified series.
- This product has been used as binder for coating agents.
X-40-2667A

X-40-2667A
- Addition cure type
- Two-component type consisting of a main agent (X-40-2667A) and a curing agent (X-40-2667B)
- Low curing shrinkage enables molded products and thick films
- Good adhesion to glass substrates
KR-311

KR-311
- Standard product of methyl/phenyl type
- This product forms cured films with excellent heat resistance.
- Good compatibility with organic resins
- This product has been mainly used as a binder for heat-resistant paints.
KR-300

KR-300
- This product forms cured film with excellent heat resistance.
- High hardness
- This product has been mainly used as a binder for heat-resistant paints.
KR-282

KR-282
- This product forms cured film with excellent heat resistance.
- Minimal cracking and peeling at high temperatures, good balance of performance
- This product has been mainly used as a binder for heat-resistant paints.
KR-271

KR-271
- This product forms cured film with excellent heat resistance and electrical insulation.
- Flexibility and less cracking and peeling at high temperatures
- This product has been mainly used as a binder for coatings and paints.
KR-255

KR-255
- Even at room temperature, when the solvent volatilizes, a lacquer film is formed.
- Heating further forms a film with excellent heat resistance and chemical resistance
- This product has been mainly used as coatings with electrical insulation and water resistance.
X-40-2406M

X-40-2406M
- Excellent heat shock resistance
- Heat resistance and releasability
This product has been mainly used as coating and paint applications.
KR-242A

KR-242A
- This product forms high hardness film.
- Less smoke generation when heated
- This product has been mainly used as binders of inorganic materials (i.e. mica).
KR-220LP

KR-220LP
- Solid (100% silicone content) and powdered
- KR-220L further ground and powdered
- Less smoke generation