• Relatively low molecular weight and excellent compatibility with epoxy resins
• Good leveling and wettability with linear siloxane structure
• Low viscosity and effective as a reactive diluent

• This product is TX(toluene, xylene)-free type and uses PGMAC solvent.
• This product has the heat resistance of silicone resin and corrosion resistance and adhesion of epoxy resin.
• This product has been used as binder for coating agents.

• Addition cure type
• One-component product containing curing catalyst
• Low curing shrinkage enables molded products and thick films
• Good adhesion to glass substrates

• TX (toluene, xylene)-free type; uses PGMAC solvent
• Excellent heat resistance
• High hardness
• Proven mainly as a binder for heat-resistant paints

• This product can be used by simply cold-blend*.
• Applicable organic resins are silicone-modified acrylic polymers/polyesters/alkyds/weak solvent acrylic resins/NAD.
• This product improves weather resistance, heat resistance, anti-marking pen fouling properties, acid/alkali resistance, etc..
• Recommended additive amount is 10~50 parts per 100 parts resin solid content.

* Cold blend: A method of blending by simply mixing without heating

• This product has high hardness and flexural resistance.
• Since this product cures by de-ethanol reaction, it is environmentally friendly.

• Silane coupling agent with cyclization polymerization properties
• Superior thermal degradability and adhesiveness compared to KBM-503 and KBM-5103
• Silane coupling agent with acrylic groups as organic functional groups
• This product is used for processing silica.

• Ultra high molecular weight
• Even at room temperature, when the solvent volatilizes, a lacquer film is formed.
• Heating further forms a film with excellent heat resistance and chemical resistance
• This product has been mainly used as coatings with electrical insulation and water resistance.

• This product has high hardness and flexural resistance.
• Rapid curing

• Relatively low molecular weight and excellent compatibility with epoxy resins
• This product has a cyclic siloxane backbone and low cure shrinkage.
• Good crack resistance due to bifunctional

• High hardness and crack resistance
• Excellent resistance to yellowing and cracking after

• Developed products
• Combines high hardness, bending resistance, heat cracking resistance, and impact resistance

• Relatively low molecular weight and excellent compatibility with epoxy resin
• Low shrinkage during curing due to cyclic siloxane structure

• Silane coupling agent with ethylenediamine structure
• By silane treatment, glass fiber and resin can be chemically bonded.
  Improving mechanical strength, heat resistance, water resistance and electrical properties can be expected.
• This product is used for paints and adhesives.

• Silane coupling agent with primary amino groups
• By silane treatment, glass fiber and resin can be chemically bonded.
  Improving mechanical strength, heat resistance, water resistance and electrical properties can be expected.
• This product is used for adhesives and heat insulation mats.

• Silane coupling agent with ethylenediamine structure
• By silane treatment, glass fiber and resin can be chemically bonded.
  Improving mechanical strength, heat resistance, water resistance and electrical properties can be expected.
• This product is used for paints and adhesives.

• Silane coupling agent with epoxy groups
• This product makes chemically bond with glass fiber and resin.
  It improves, strength, heat resistance, water resistance and electrical properties.

• Silane coupling agent with primary amine
• Silane coupling agent with amino group that is compatible with a wide range of resins such as nylon and PVC
• This product is used for surface treatment of glass fiber. And it is used as an ingredient for adhesives and heat insulation mats.

• Silane coupling agent with epoxy group
• This product makes chemically bond with glass fiber and resin.
  It improves, strength, heat resistance, water resistance and electrical properties.

• Silane coupling agent with epoxy groups
• This product makes chemically bond with glass fiber and resin.
  It improves strength, heat resistance, water resistance and electrical properties.
• This product has been used in epoxy laminates and MC nylon.

• Silane coupling agent with epoxy groups
• This product makes chemically bond with glass fiber and resin.
  It improves, strength, heat resistance, water resistance and electrical properties.

• Silane coupling agent with epoxy groups
• This product makes chemically bond with glass fiber and resin.
  It improves, strength, heat resistance, water resistance and electrical properties.

• Relatively low molecular weight and excellent compatibility with epoxy resin
• Less shrinkage during curing due to cyclic siloxane structure
• Good crack resistance due to di-functionality

• Vinyl group silane coupling agent compatible with polyethylene, polypropylene, etc.
• Mainly used to improve heat resistance of polyethylene for electric wires
• This product is used for cross-linked polyethylene

• Vinyl group silane coupling agent compatible with polyethylene, polypropylene, etc.
• Mainly used to improve heat resistance of polyethylene for electric wires
• This product is used for cross-linked polyethylene

• This product has the heat resistance of silicone resin and the chemical resistance, bending resistance, and high gloss of polyester resin.
• Owing to the non-stich property, this product has been used as heat resistant paints for kitchen area.

• Standard product of methyl/phenyl type
• This product forms cured films with excellent heat resistance.
• Good compatibility with organic resins
• This product has been mainly used as a binder for heat-resistant paints.

• Solid (100% silicone content) and powdered
• KR-220L further ground and powdered
• Less smoke generation

• This product forms high hardness film.
• Less smoke generation when heated
• This product has been mainly used as binders of inorganic materials (i.e. mica).

• Excellent heat shock resistance
• Heat resistance and releasability

This product has been mainly used as coating and paint applications.

• Modifier of organic resins
• Adding heat resistance and weather resistance are possible.
• This product has been mainly used as paint applications.

• Modifier for organic resins
• More compatibility and flexibility than KR-211
• Adding heat resistance and weather resistance
• This product has been mainly used as paint applications.

• Even at room temperature, when the solvent volatilizes, a lacquer film is formed.
• Heating further forms a film with excellent heat resistance and chemical resistance
• This product has been mainly used as coatings with electrical insulation and water resistance.

• This product forms cured film with excellent heat resistance and electrical insulation.
• Flexibility and less cracking and peeling at high temperatures
• This product has been mainly used as a binder for coatings and paints.

• This product forms cured film with excellent heat resistance.
• Minimal cracking and peeling at high temperatures, good balance of performance
• This product has been mainly used as a binder for heat-resistant paints.

• This product forms cured film with excellent heat resistance.
• High hardness
• This product has been mainly used as a binder for heat-resistant paints.

• Standard product of methyl/phenyl type
• Modifying heat resistance and weather resistance of organic resins
• This product imparts flexibility and crack resistance to silicone oligomer based coating agents.

• Addition cure type
• Two-component type consisting of a main agent (X-40-2667A) and a curing agent (X-40-2667B)
• Low curing shrinkage enables molded products and thick films
• Good adhesion to glass substrates

• This product has the heat resistance of silicone resin and corrosion resistance and adhesion of epoxy resin.
• This is a standard product of epoxy resin modified series.
• This product has been used as binder for coating agents.

• This product has the heat resistance of silicone resin and corrosion resistance and adhesion of epoxy resin.
• This product can be cured at room temperature in combination with polyamine curing agent (KP-390, etc.).
• Since this product cures at room temperature, it has been used as binder for on-site painting coating agents.

• This product has the heat resistance of silicone resin and corrosion resistance and adhesion of epoxy resin.
• This product has better substrate adhesion and impact resistance tan ES-1001N.
• This product has been used as binder for coating agents.

• This product has the heat resistance of silicone resin and the room temperature curability of alkyd resin.

• This product has the heat resistance of silicone resin and the chemical resistance, flex resistance, and high gloss of polyester resin.
• This is a standard product of polyester resin modified series.

• This product has the heat resistance of silicone resin and the chemical resistance, flex resistance, and high gloss of polyester resin.
• Faster curing speed compared to KR-5230

• Solid (100% silicone content) in flake form
• This product has been used as resistor paints, binders for sintered metal powder, etc.
• Less smoke generation