- HOME
- Search by required performance
- Water Resistance
Water Resistance

It has excellent water resistance, mainly due to the action of methyl groups.
Results 58
X-41-1610

X-41-1610
- This product is TX(toluene, xylene)-free type and uses PGMAC solvent.
- This product has the heat resistance of silicone resin and corrosion resistance and adhesion of epoxy resin.
- This product has been used as binder for coating agents.
X-48-1030

X-48-1030
- TX (toluene, xylene)-free type; uses PGMAC solvent
- Excellent heat resistance
- High hardness
- Proven mainly as a binder for heat-resistant paints
X-40-2756

X-40-2756
- Addition cure type
- One-component product containing curing catalyst
- Low curing shrinkage enables molded products and thick films
- Good adhesion to glass substrates
X-40-9309A

X-40-9309A
- This product contains UV absorber to prevent UV degradation of base material.
- This product cures at room temperature.
- One-component type (contains curing catalyst)
- This product forms high hardness coating film.
X-88-1007

X-88-1007
- Good adhesion to hard-to-bond base materials such as SUS and acrylic
- Good crack resistance and water repellency
X-88-1004

X-88-1004
- Good adhesion to hard-to-bond base materials such as SUS and acrylic
- High hardness and good scratch resistance
X-48-1600

X-48-1600
- This product has high hardness and flexural resistance.
- Since this product cures by de-ethanol reaction, it is environmentally friendly.
KR-251

KR-251
- Ultra high molecular weight
- Even at room temperature, when the solvent volatilizes, a lacquer film is formed.
- Heating further forms a film with excellent heat resistance and chemical resistance
- This product has been mainly used as coatings with electrical insulation and water resistance.
X-48-1500

X-48-1500
- This product has high hardness and flexural resistance.
- Rapid curing
X-40-9312

X-40-9312
- High hardness and crack resistance
- Excellent resistance to yellowing and cracking after
KR-4000G

KR-4000G
- One-component type
- High gloss
- Excellent water repellency and water sliding properties
- Exhibits antifouling performance even when wiped off.
X-40-2327

X-40-2327
- Fast curing
KBM-602

KBM-602
- Silane coupling agent with ethylenediamine structure
- By silane treatment, glass fiber and resin can be chemically bonded.
Improving mechanical strength, heat resistance, water resistance and electrical properties can be expected. - This product is used for paints and adhesives.
KBM-6803

KBM-6803
- Silane coupling agent with ethylenediamine structure and longer spacer chain than conventional product (KBM-603)
- Owing to the long spacer chain, improvement of hydrophobicity and flexibility can be expected.
- Improvement of adhesiveness, alkali resistance and water resistance can be expected.
KBE-903

KBE-903
- Silane coupling agent with primary amine
- Silane coupling agent with amino group that is compatible with a wide range of resins such as nylon and PVC
- This product is used for surface treatment of glass fiber. And it is used as an ingredient for adhesives and heat insulation mats.
KR-401

KR-401
- Excellent flexural resistance
- High gloss
KR-213

KR-213
- For resin modification
- Can add flexibility and crack resistance
KR-400

KR-400
- Standard product of one-component type (containing curing catalyst)
- High hardness
KR-400N

KR-400N
- High hardness
- KR-400N is made from KR-400 without curing catalysis.
KBM-603

KBM-603
- Silane coupling agent with ethylenediamine structure
- By silane treatment, glass fiber and resin can be chemically bonded.
Improving mechanical strength, heat resistance, water resistance and electrical properties can be expected. - This product is used for paints and adhesives.
KBM-903

KBM-903
- Silane coupling agent with primary amino groups
- By silane treatment, glass fiber and resin can be chemically bonded.
Improving mechanical strength, heat resistance, water resistance and electrical properties can be expected. - This product is used for adhesives and heat insulation mats.
KBE-402

KBE-402
- Silane coupling agent with epoxy groups
- This product makes chemically bond with glass fiber and resin.
It improves, strength, heat resistance, water resistance and electrical properties.
KBE-403

KBE-403
- Silane coupling agent with epoxy group
- This product makes chemically bond with glass fiber and resin.
It improves, strength, heat resistance, water resistance and electrical properties.
KBM-303

KBM-303
- Silane coupling agent with epoxy groups
- This product makes chemically bond with glass fiber and resin.
It improves strength, heat resistance, water resistance and electrical properties. - This product has been used in epoxy laminates and MC nylon.
KBM-402

KBM-402
- Silane coupling agent with epoxy groups
- This product makes chemically bond with glass fiber and resin.
It improves, strength, heat resistance, water resistance and electrical properties.
KBM-403

KBM-403
- Silane coupling agent with epoxy groups
- This product makes chemically bond with glass fiber and resin.
It improves, strength, heat resistance, water resistance and electrical properties.
KBM-4803

KBM-4803
- Silane coupling agent with epoxy group and longer spacer chain than conventional product (KBM-403)
- Owing to the long spacer chain, improvement of hydrophobicity and flexibility can be expected.
- Improvement of adhesiveness, high filler filling, flexibility of cured material, alkali resistance, water resistance can be expected.
KBM-1083

KBM-1083
- Silane coupling agent with vinyl group and longer spacer chain than conventional product (KBM-1003)
- Owing to the long spacer chain, improvement of hydrophobicity and flexibility can be expected.
- Improvement of high filler filling, flexibility of cured material, alkali resistance, water resistance can be expected.
X-12-1267B

X-12-1267B
- Silane coupling agent with butadiene polymer structure as the main backbone
- Butadiene polymer backbone is expected to improve compatibility and adhesiveness to rubber materials
- With high hydrophobicity, improving water resistance can be expected.
X-12-1267B-ES

X-12-1267B-ES
- Silane coupling agent with butadiene polymer structure as the main skeleton
- Butadiene polymer skeleton is expected to improve compatibility and adhesiveness to rubber materials
- With high hydrophobicity, improving water resistance can be expected.
KBM-5803

KBM-5803
- Silane coupling agent with methacrylate group and longer spacer chain than conventional product (KBM-503)
- Owing to the long spacer chain, improvement of hydrophobicity and flexibility can be expected.
- Improvement of adhesiveness, high filler filling, flexibility of cured material, alkali resistance, water resistance can be expected.
X-12-5263HP

X-12-5263HP
- Silane coupling agent with more hydrolyzable silyl groups than general-purpose silanes
- Imparting hydrophobicity and water resistance can be expected.
Resin modifier and binder application is possible.
X-88-475

X-88-475
- Silane coupling agent with amino acid ester structure
- By surface treatment of glass fiber, adhesion to epoxy resins etc. will be improved.
- This product is used as a terminal modifier for urethane resins to improve adhesion and water resistance.
- Aqueous solution shows neutrality and high stability.
KR-5206

KR-5206
- This product has the heat resistance of silicone resin and the room temperature curability of alkyd resin.
KR-220LP

KR-220LP
- Solid (100% silicone content) and powdered
- KR-220L further ground and powdered
- Less smoke generation
KR-242A

KR-242A
- This product forms high hardness film.
- Less smoke generation when heated
- This product has been mainly used as binders of inorganic materials (i.e. mica).
X-40-2406M

X-40-2406M
- Excellent heat shock resistance
- Heat resistance and releasability
This product has been mainly used as coating and paint applications.
KR-255

KR-255
- Even at room temperature, when the solvent volatilizes, a lacquer film is formed.
- Heating further forms a film with excellent heat resistance and chemical resistance
- This product has been mainly used as coatings with electrical insulation and water resistance.
KR-271

KR-271
- This product forms cured film with excellent heat resistance and electrical insulation.
- Flexibility and less cracking and peeling at high temperatures
- This product has been mainly used as a binder for coatings and paints.
KR-282

KR-282
- This product forms cured film with excellent heat resistance.
- Minimal cracking and peeling at high temperatures, good balance of performance
- This product has been mainly used as a binder for heat-resistant paints.
KR-300

KR-300
- This product forms cured film with excellent heat resistance.
- High hardness
- This product has been mainly used as a binder for heat-resistant paints.
KR-311

KR-311
- Standard product of methyl/phenyl type
- This product forms cured films with excellent heat resistance.
- Good compatibility with organic resins
- This product has been mainly used as a binder for heat-resistant paints.
X-40-2667A

X-40-2667A
- Addition cure type
- Two-component type consisting of a main agent (X-40-2667A) and a curing agent (X-40-2667B)
- Low curing shrinkage enables molded products and thick films
- Good adhesion to glass substrates
ES-1001N

ES-1001N
- This product has the heat resistance of silicone resin and corrosion resistance and adhesion of epoxy resin.
- This is a standard product of epoxy resin modified series.
- This product has been used as binder for coating agents.
ES-1002T

ES-1002T
- This product has the heat resistance of silicone resin and corrosion resistance and adhesion of epoxy resin.
- This product can be cured at room temperature in combination with polyamine curing agent (KP-390, etc.).
- Since this product cures at room temperature, it has been used as binder for on-site painting coating agents.
ES-1023

ES-1023
- This product has the heat resistance of silicone resin and corrosion resistance and adhesion of epoxy resin.
- This product has better substrate adhesion and impact resistance tan ES-1001N.
- This product has been used as binder for coating agents.
KR-510

KR-510
- Standard product of methyl/phenyl type
- Modifying heat resistance and weather resistance of organic resins
- This product imparts flexibility and crack resistance to silicone oligomer based coating agents.
KR-5230

KR-5230
- This product has the heat resistance of silicone resin and the chemical resistance, flex resistance, and high gloss of polyester resin.
- This is a standard product of polyester resin modified series.
KR-5234

KR-5234
- This product has the heat resistance of silicone resin and the chemical resistance, flex resistance, and high gloss of polyester resin.
- Faster curing speed compared to KR-5230
KR-5235

KR-5235
- This product has the heat resistance of silicone resin and the chemical resistance, bending resistance, and high gloss of polyester resin.
- Owing to the non-stich property, this product has been used as heat resistant paints for kitchen area.
KC-89S

KC-89S
- This product contains only T units.
- This product forms high hardness cured film.
- This product has been used as binder for coating agents.
KR-515

KR-515
- Higher molecular weight than KC-89S
- Contains only T units
- This product has been used as binder for coating agents and modifier for organic resins.
KR-500

KR-500
- Higher molecular weight than KR-515
- Made up of T units only
- Standard product in methyl type
- This product has been used as binder for coating agents and modifier for organic resins.
X-40-9225

X-40-9225
- Higher molecular weight than KR-500
- Contains only T units
- This product has been used as binder for coating agents and modifier for organic resins.
X-40-9246

X-40-9246
- Good crack resistance
- This product has been used as binder for coating agents and modifier for organic resins.
X-40-9250

X-40-9250
- This product has flexibility owing to the introduction of D unit.
- This product has excellent water repellency and water slip properties
- This product has been used as a coating binder.
KR-220L

KR-220L
- Solid (100% silicone content) in flake form
- This product has been used as resistor paints, binders for sintered metal powder, etc.
- Less smoke generation
KR-401N

KR-401N
- This product forms flexible cured film.
- High gloss
- Not containing curing catalyst
(KR-401 is containing curing catalyst)