• This product contains UV absorber to prevent UV degradation of base material.
• This product cures at room temperature.
• One-component type (contains curing catalyst)
• This product forms high hardness coating film.

• Acrylic equivalent 330g/mol
• This product imparts flexural resistance to acrylic resins.
• This product has excellent compatibility with acrylic resins and various photoinitiators.
• This product is applicable to UV/EB curing systems.

• Relatively low molecular weight and excellent compatibility with epoxy resins
• Good leveling and wettability with linear siloxane structure
• Low viscosity and effective as a reactive diluent

• Alkali resistance
• Water resistance

• Very high reactivity of alkoxy group and rapid curing
• Alkali resistance
• Water resistance

• This product can be used by simply cold-blend*.
• Applicable organic resins are silicone-modified acrylic polymers/polyesters/alkyds/weak solvent acrylic resins/NAD.
• This product improves weather resistance, heat resistance, anti-marking pen fouling properties, acid/alkali resistance, etc..
• Recommended additive amount is 10~50 parts per 100 parts resin solid content.

* Cold blend: A method of blending by simply mixing without heating

• This product can be added to silicone coatings.
• This product imparts water repellency and water sliding properties.
• This product maintains anti-fouling property even after wiping-up application.

• Good adhesion to hard-to-bond base materials such as SUS and acrylic
• Good crack resistance and water repellency

• Good adhesion to hard-to-bond base materials such as SUS and acrylic
• High hardness and good scratch resistance

• This product has high hardness and flexural resistance.
• Since this product cures by de-ethanol reaction, it is environmentally friendly.

• Relatively low molecular weight and excellent compatibility with epoxy resins
• This product has a cyclic siloxane backbone and low cure shrinkage.
• Good crack resistance due to bifunctional

• This product has high hardness and flexural resistance.
• Rapid curing

• High hardness and crack resistance
• Excellent resistance to yellowing and cracking after

• Developed products
• Combines high hardness, bending resistance, heat cracking resistance, and impact resistance

• Relatively low molecular weight and excellent compatibility with epoxy resin
• Low shrinkage during curing due to cyclic siloxane structure

• Easy surface migration when added to resins
• Provides antistatic performance with a small amount of addition
• This product can impart peeling, slipping and water sliding properties.

• One-component type
• High gloss
• Excellent water repellency and water sliding properties
• Exhibits antifouling performance even when wiped off.

• Reactive functional groups are Vinyl groups.
• Vinyl equivalent 530g/mol
• Flame retardant for Polycarbonate

• This product contains only T units.
• This product forms high hardness cured film.
• This product has been used as binder for coating agents.

• UV curable, good curability under air
• Low viscosity, excellent scratch resistance and low warpage
• Compatible with coating methods that require low viscosity, such as spray coating

• This product has high hardness and crack resistance. Excellent crack resistance, especially in high-temperature environments.
• Excellent antifouling properties (water repellency, water sliding properties, and anti-marking pen fouling properties)
• Fast curing
• One-component type

• Higher molecular weight than KC-89S
• Contains only T units
• This product has been used as binder for coating agents and modifier for organic resins.

• Higher molecular weight than KR-515
• Made up of T units only
• Standard product in methyl type
• This product has been used as binder for coating agents and modifier for organic resins.

• Higher molecular weight than KR-500
• Contains only T units
• This product has been used as binder for coating agents and modifier for organic resins.
  

• Good crack resistance
• This product has been used as binder for coating agents and modifier for organic resins.

• Flame retardant agents for polycarbonate
• Good transparency

• This product has flexibility owing to the introduction of D unit.
• This product has excellent water repellency and water slip properties
• This product has been used as a coating binder.

• High hardness
• KR-400N is made from KR-400 without curing catalysis.

• Relatively low molecular weight and excellent compatibility with epoxy resin
• Less shrinkage during curing due to cyclic siloxane structure
• Good crack resistance due to di-functionality

• This product forms flexible cured film.
• High gloss
• Not containing curing catalyst
  (KR-401 is containing curing catalyst)

• Fast curing

• Reactive functional groups are methacrylic groups.
• Methacryl equivalent 230g/mol
• Applicable to UV/EB curing system

• Alkoxy groups are methoxy groups.
• Acrylic equivalent 210g/mol
• Applicable to UV/EB curing system
• Lower volatility than KBM-5103 (monomer type)

• Alkoxy groups are methoxy groups.
• Organic substituent has both methyl group as well as mercapto group
• Mercapto equivalent 450g/mol

• Alkoxy groups are methoxy groups and ethoxy groups.
• Mercapto equivalent 800g/mol

• Alkoxy groups are methoxy groups.
• The organic functional groups have methyl groups in addition to the epoxy groups.
• Epoxy equivalent 280g / mol

• Alkoxy groups are methoxy groups.
• Epoxy equivalent 590g/mol

• Alkoxy groups are methoxy groups and ethoxy groups.
• Epoxy equivalent 830g/mol

• Standard product of methyl/phenyl type
• Modifying heat resistance and weather resistance of organic resins
• This product imparts flexibility and crack resistance to silicone oligomer based coating agents.

• For resin modification
• Can add flexibility and crack resistance

• Standard product of one-component type (containing curing catalyst)
• High hardness

• Excellent flexural resistance
• High gloss