By Product type

Release agents

The surface tension of silicone is low and it spreads easily, so it provides good wetting of fine, irregular surfaces. It is chemically inactive and can be used with almost all molding materials. Silicone has excellent heat and cold resistance and offers good performance over a wide temperature range. These characteristics are why silicone is used as a mold-release agent in a range of industries including the rubber industry, resin industry, food processing industry, and die casting. Silicone mold-release agents are available in various forms including emulsions, fluid types, solvent types, bake-on types, and sprays.



Can be used in diverse applications including rubbers, plastics, metals, and foods.


Silicone mold-release agents are non-compatible with almost all organic materials, so they offer outstanding mold-release performance.

Heat and cold resistance

They have excellent resistance to heat and cold and provide good mold-release results over a wide temperature range.

Chemical stability

They are chemically inactive, so they do not cause corrosion, swelling, or deformation of molds or molded items.

Can be used on complex molds

Silicone mold-release agents have low surface tension, so they provide good wetting of intricately shaped molds. This means that even complex molded items release easily from the mold.

Typical Products

Category Applications Grade Features
Emulsion type Rubber industry,
resin industry,
food processing industry,
die casting,
surface processing,
synthetic fibers
KM-9737A For food packaging containers
KM-9738A For food packaging containers, Low stickness, Good antiblocking effect
KM-9745A For food packaging containers, Product formulated as a measure against stress cracking on PS
KM-9739 For food packaging containers, Good paintability
KM-9782 For food packaging containers, Reduced low-molecular-weight siloxane
KM-722T Acts to clean molds, Good wetting of molds
KM-740T General industrial use, Good gloss enhancement and surface lubrication
KM-742T General industrial use, KM-740T low-concentration type
POLON-MF-33 General industrial use,
Good dilution stability, mechanical stability and storage stability
KM-860A Concentrated type, Good cost performance
KM-862T Concentrated type, Viscosity of the base oil is higher than that of KM-860A.
SILCAST-U Suitable for die casting
Fluid type KF-96 Suitable for applications in which water and solvents cannot be used
KF-965 Good thermal oxidation stability even at temperatures above 250°C
KF-54 Good paintability
KF-410 Methylstyryl-modified, Good heat resistance
KF-412 Long chain alkyl-modified, Good paintability and lubricity
KF-4701 Long chain alkyl-modified, Good paintability
KM-244F Water-soluble type, Can be diluted with water or alcohol
KS-61 Paste type, Long-lasting with good heat resistance and lubricity
KS-62F Heat-resistant type of KF-61
Solvent type Rubber industry,
resin industry,
die casting,
surface processing,
synthetic fibers
KS-702 High-viscosity dimethyl silicone fluid base
KS-707 Suitable for heat-cure resins
Bake-on type KS-700 Little migration of the mold-release agent to the molded item, Provides repeated mold-release
KS-7201 For low-temperature bake-on applications
SEPA-COAT Forms film at room temperature
Spray type General purpose, gloss enhancement KF-96SP KF-96-1000cs spray
Paintable applications KF-412SP KF-412 spray
High-temperature applications KF-965SP KF-965-100cs spray
For rubbers and plastics RELEASE KS-707 spray
SEPA-COAT-SP SEPA-COAT spray, Forms durable coating
Page Top