By Product type

One-component liquid rubbers

With one-component liquid silicone rubber compounds, work can begin as soon as the product is ejected from its tube or cartridge. These products become elastic rubbers after curing, and adhere well to almost all materials as they cure. These properties make one-component liquid silicone rubbers suitable for a wide range of applications.

Features

Electrical properties

They have outstanding electrical properties, in terms of volume resistivity and ability to withstand high voltage.

Heat and cold resistance

They can be used over a wide temperature range (-40°C to +180°C).

Impact resistance

The cured rubbers have excellent rubber elasticity and absorb vibration and impact.

Weather resistance

One-component liquid silicone rubbers exhibit almost no deterioration when exposed to the outdoor elements for long periods, because they have outstanding resistance to UV rays, ozone, and moisture.

Workability

These products are easy to use, because they can be ejected from their tubes (or other containers) and used immediately.

Typical Products

Applications Intended
use
Grade Curing method Reaction mechanism
(By-product gas)
Features
General electrical applications Sealing,
fixing
KE-4958 Room temperature cure Condensation
(Alcohol)
Paste, standard type
KE-4956 Room temperature cure Condensation (Alcohol) Medium viscosity, standard type
KE-4930-G Room temperature cure Condensation (Alcohol) Paste, all purpose use
KE-4915-B Room temperature cure Condensation (Alcohol) High viscosity
KE-1884 Heat cure Addition Medium viscosity, low temperature cure
KE-1885 Heat cure Addition High viscosity, low temperature cure
KE-1875 Heat cure Addition Paste
KE-8101 Heat cure Addition High viscosity, high strength
Flame-resistance Sealing, fixing KE-4951-G Room temperature cure Condensation (Alcohol) Paste, No-cure inhibition of addition cure products
KE-1812 Heat cure Addition Paste, high thixotropy
Thermal interface materials Sealing, fixing KE-4961-W Room temperature cure Condensation (Alcohol) Thermal conductivity 1.6W/m・K
KE-1867 Heat cure Addition Thermal conductivity 2.2W/m・K
High heat resistance Sealing, fixing KE-3412 Room temperature cure Condensation (Acoeone) Heat resistance upto 250℃
Special Sealing, fixing M-BARRIER-02 Heat cure Addition Sulfurization prevention
KE-1858-D2 Heat cure Addition Cure inhibition counter part product, Storage at room temperature possible
IO-SEAL-300 Heat cure Addition LLC (Long Life Coolant) resistance
FE-2000 Room temperature cure Condensation (Alcohol) Oil and solvent resistance (Fluoro silicone)
FE-61 Heat cure Addition Oil and solvent resistance (Fluoro silicone)
General electrical applications Coating MR-COAT-O2F Room temperature cure Condensation (Alcohol) Low viscosity, solvent dilution, high hardness
KE-4971 Room temperature cure Condensation (Alcohol) Low viscosity, solvent-free
KE-4955 Room temperature cure Condensation (Alcohol) Low viscosity, solvent-free
KE-1886 Heat cure Addition Low viscosity, low temperature cure
KUV-3433-UV UV cure Radical Rapid cure
Precision parts Sealing, fixing KER-6020-F2 Heat cure Addition MEMS die-bond
KER-4410 UV cure + Heat cure Addition MEMS die-bond
X-32-4081-1 Heat cure Addition Electrical conductive
SCR-3400-S12 Heat cure Addition Modified silicone, Ultra-high strength
Potting KER-6201 Heat cure Addition Cold resistant transparent gel
Page Top